What Type of Wire for a Security Camera?

Used for the first time on a large scale by the banking industry, surveillance cameras are now widely used to monitor everything from a room in a house to a whole warehouse. According to securitypology.com, because complex security camera systems are expensive, you can use a camcorder with a built-in motion detector – or plug in motion detection software – to achieve the same result. You can even connect the camera to the computer and use the free video capture software to continuously record the video stream.

Camcorder With Usb Streaming Feature Remove the SD card or tape from the tape deck of the camcorder, if a tape is present, and turn on the camcorder. Open the camera menu, navigate to “Settings” and look for the “USB Stream” option. In Sony cameras, the USB streaming option is in the Camera menu. Turn on the USB Stream option and set the Camera / Playback switch to “Camera.” Put the camera in a proper position to capture the area you want to keep an eye on. Insert the installation disc that came with the camera into your computer. The setup menu should appear automatically. Select to install the USB drivers for your camera and operating system, then restart your computer. Connect the camera to the computer using the USB cable that came with the camera. Start your video capture software and select the camcorder as the video source. The camcorder should be recognized by any video capture software. Decrease the resolution at which video capture software records the video stream, and decrease the frame rate to about 10 to 15 frames per second to preserve disk space.

Select the format in which you want to record the video. Most software allows you to select from at least AVI, WMV and MP4. Click “Record” or a similar button when you start recording the video stream.

Camcorder With Motion Detection Feature

urn on the camcorder and open the on-screen menu. Enable the motion detection feature, usually located in the Camera menu. Select a lower video resolution from your camcorder settings so you can record more data before running out of space. Select the format in which you want to record the video. Most software allows you to select from at least AVI, WMV and MP4. Put the camera in a proper position to capture the area you want to keep an eye on. Start recording. The camera will only record when its built-in motion sensor detects the motion.

Camcorder And Motion Detection Software

emove the SD card or tape from the camcorder if a tape is present. Turn on your camcorder and put it in a proper position to capture the area you want to keep an eye on. Connect the camera to the video capture card or TV tuner. Download, install and run the motion detection software on your computer. Examples include iSpy Connect, VisionGS, and Zone Trigger (see Resources). Select the camcorder as the video source to view the video from the camera on the screen. Enable the motion detection option if it is not already enabled. This causes the software registry only when motion is detected. Adjust the video settings to decrease the size of the file. Reduce the resolution in which software records, and also decrease the frame rate to about 10 to 15 frames per second, to record more video before running out of disk space. Select the format in which you want to record the video. Most software allows you to select from at least AVI, WMV and MP4. Click “Record” or a similar button when you start recording. The software will record only when it detects motion in the video feed, saving disk space.

Leave a Reply